제품소개
ALL ALLOY 란?
|
ALL ALLOYS |
|
|
아래에 열거된 품목 목록은 당사에서 정밀 극박판, 호일의 형태로 오파 가능한 전체 ALLOY LIST입니다. 공급 규격의 변화 가능성에 맞추고자 일정량은 모재의 형태로 보유하고 있아오니 아래 항목에 열거되어 있지 않더라도 문의 주시기 바랍니다.
[견적 요청하기]
SECTION I
| Description | |
| Copper beryllium and nickel beryllium strips and foils | |
| CuBe2 - Alloy 25 / C17200 / CW101C | |
| CuBe2 - Alloy 290 mill hardened / C17200 / CW101C | |
| CuBe2 - Alloy 190 mill hardened / C17200 / CW101C | |
| CuCo0.5Be - Alloy 174 mill hardened / C17410 | |
| CuNi1.2Be0.3 - Alloy 60 mill hardened / C17460 | |
| CuNi2Be - Alloy 3 / C17510 / CW110C | |
| CuNi2Be - Alloy 3 mill hardened / C17510 / CW110C | |
| CuNiBe0.5 - Alloy 390 mill hardened / C17460 | |
| NiBe2 - Alloy 360 / N03360 | |
| Copper-beryllium rods and wires for screw machining or cold heading | |
| CuBe2 - Alliage 25 / C17200 / CW101C | |
| CuBe2 - Alliage 25 hardened/ C17200 / CW101C | |
| CuBe2Pb - CuBe2Pb Alloy M25 / C17300 / CW102C | |
| CuBe2Pb All. M25 hardened / C17300 / CW102C | |
| Copper and low-alloyed copper | |
| Cu-ETP - E Cu 58 / Cu a1 (Cu99) / CW004A / C11000 | |
| Cu-OF - OF-Cu / Cu c1 / CW008A / C10200 | |
| Cu-OFE - OFE-Cu / C10100 | |
| STOL® 194 - CuFe2.5P / C19400 | |
| STOL® 76 - CuNi1.3Si0.25 / C19010 | |
| STOL® 76M - CuNi1.3Si0.25 / C19002 | |
| STOL® 78 - CuMg0.6 / C18665 | |
| STOL® 79 - CuFe2.5P / CW107C / C19400 | |
| STOL® 94 - CuNi2.6Si0.6Zn0.8Sn0.4 / C70310 |
SECTION II
| Description | |
| Brasses, bronzes and nickel silvers in strips and foils | |
| CuNi12Zn24 - Nickel Silver (M12) / CW403J / ~ C75700 | |
| CuNi18Zn20 - Nickel Silver (M18) / CW409J / ~ C76400 | |
| CuNi30Mn1Fe - Copper-Nickel, 30% / CW354H / ~ C71500 | |
| CuNi44Mn1 - Constantan / 2.0842 / ~ C72150 | |
| CuNi9Sn2 - Copper-Nickel Alloy / CW351H / C72500 | |
| CuSn3Zn9 - (Bz 902) / CW454K / ~ C42500 | |
| CuSn6 - Phosphor Bronze, 6% / CW452K / C51900 | |
| CuSn8 - Phosphor Bronze, 8% / CW453K / C52100 | |
| CuZn23Al3Co - Special Brass / CW703R / ~C68800 | |
| CuZn28 - Brass / CW504L | |
| CuZn37 - Yellow Brass 63% / ~CW508L / ~CW507L / ~C27000/ ~C27200 | |
| CuZn37Pb2 - High Leaded Brass, 62% / ~CW606N / ~CW608N / ~C35300 | |
| CuZn38Pb2 - High Leaded Brass, 62% / CW608N / ~C35300 | |
| Nickel and nickel alloys in strips and foils | |
| Evanohm® R - NiCr20Al2.5Cu2Mn1Si1 / 2.4872 | |
| FeNi29Co18 - NiCo29/18 (Kovar) / 1.3981 / ~ K94610 | |
| Ni - Nickel 200 / 2.4068 / N02200 | |
| Ni - 2.4061 / 2.4060 / 2.4066 / Nickel 201/200 / N02200 / N02201 | |
| Ni - Nickel hohe Reinheit 99.8% / 2.4061 / N02201 | |
| NiCr15Fe - (Inconel) Alloy 600 / ~ 2.4816 / N06600 | |
| NiCr19Fe18.5Mo3 Alloy 718 (Inconel, Hastelloy) / N07718 / 2.4668 | |
| NiCr20 2.4869 / N06003 | |
| NiCr22Fe18Mo9 Alloy X (Inconel, Hastelloy) / N06002 | |
| NiCr22Mo9Fe5 - (Inconel) Alliage 625 / ~ 2.4856 / N06625 | |
| NiCu30Fe - (Monel) Alloy 400 / 2.4360 / N04400 | |
| NiMo16Cr15W - (Hastelloy) All. C-276 / 2.4819 / N10276 | |
| NiMo29Cr2Fe2 Hastelloy B-3 / N10675 / 2.4600 |
SECTION III
| Description | |
| Aluminium alloys in strip | |
| Aluminium 99.5% - AW-1050 / 3.0255 / 1050A | |
| AlCuMg2 - (Avional 150) / AW2024 | |
| AlCuMg2 - (Avional 150) mill hardened / AW2024 | |
| AlMg3 - (Peraluman 300) / AW5754 | |
| AlMg4.5Mn (Peraluman 460) / AW-5083 / AA5083 | |
| AlMgSi1 - (Anticorodal 110) mill hardened / AW6082 | |
| Soft iron and non-alloyed steels | |
| 140Cr3 - Tool steel, alloyed (CR3) / 1.2008 | |
| Ck101 (H1) - High carbon steel / 1.1274 / 2CS100 / ~ G10950 | |
| Ck60 (H4) - High carbon steel / 1.1221 / ~ 2CS60 / ~ G10640 | |
| Ck67 - High carbon steel / 1.1231 / 2CS67 / ~ G10700 | |
| HT10 - Leaded high carbon steel / ~ C100 +Pb | |
| RFe80 - Steel (Fer 04) / ~1.1014 |
SECTION IV
| Description | |
| Stainless steel strips and foils | |
| 1.4034 (St40) - Stainless steel / X46Cr13 / ~ AISI 420 | |
| 1.4057 - Stainless steel / CHRONIFER® M-15X / X17CrNi16-2 / AISI 431 | |
| 1.4301 - Stainless steel / X5CrNi18-10 / AISI ~ 304 | |
| 1.4303 - Stainless steel / X4CrNi18-12 / ~ AISI 305 | |
| 1.4310 - Stainless steel / X10CrNi18-8 / ~ AISI 301 | |
| 1.4310.4 - Stainless steel / X10CrNi18-8 / ~ AISI 301 | |
| 1.4369 - Durnomag® / X11CrNiMnN19-8-6 / 13RM19 | |
| 1.4401 - Stainless steel / X5CrNiMo17-12-2 / ~ AISI 316 | |
| 1.4404 - Stainless steel / X2CrNiMo17-12-2 / ~ AISI 316L | |
| 1.4435 - Stainless steel / X2CrNiMo18-14-3 / ~ AISI 316L | |
| 1.4441 - stainless steel (implants) / X2CrNiMo18-15-3 / ISO 5832-1 / ASTM F139 | |
| 1.4571 - Stainless steel / X6CrNiMoTi17-12-2 / ~ AISI 316Ti | |
| AM 350 - Precipitation hardening stainless steel / S35000 / AISI 633 | |
| Maraging steels | |
| Duratherm® 600 / 2.4781 | |
| Durinox® - Maraging Steel / Ultrafort® 6908 / 1.6908 / X2NiCrMoTi10-10-5 | |
| Durnico® - Maraging Steel / ~ 1.6358 / ~ K93120 / ~ K93160 / ~ X2NiCoMo18-9-5 | |
| MP35N® - R30035 / ASTM F562 / ISO 5832-6 | |
| Phynox® - CoCr20N16Mo7, DIN 2.4711, ISO 5832-7, ASTM F1058, R30003 / R30008 | |
| Phytime® - Maraging Steel / X2NiCoMo18-16-5 |
SECTION V
| Description | |
| Other specialties strips and foils | |
| CuNi15Sn8 - BrushForm® 158 / ToughMet 3 / C72900 | |
| CuNi15Sn8 - BrushForm® 158 mill hardened (Toughmet 3) / C72900 | |
| Alloy 902 (Thermelast®) / N09902 | |
| FeCr20Al5 - CrAl20/5 (Aluchrom YHf) ~1.4767 | |
| FeNi29Co18 - NiCo29/18 (Kovar) / 1.3981 / ~ K94610 | |
| FeNi36 - Ni36 (Invar) / 1.3912 / ~ K93600 | |
| Mumetall® | |
| Nb - Niobium | |
| Permenorm® 5000 V5 | |
| SUPRA36® / FeNi36 | |
| SUPRA50® / FeNi48 / K94840 Alloy type 2 | |
| Ta - Tantalum / R05200 | |
| Ti - Titanium Grade 1 / ASTM F67 / ISO 5832-2 / 3.7025 / R50250 | |
| Ti - Titanium Grade 1 / 3.7025 / R50250 | |
| Ti - Titanium Grade 2 / 3.7035 / R50400 | |
| Ti - Titanium Grade 2 / ASTM F67 / ISO 5832-2 / R50400 / ~3.7035 / T40 | |
| Metals and alloys for medical applications | |
| Maraging steels (Durnico, Durinox) and Phynox | |
| MP35N® - R30035 / ASTM F562 / ISO 5832-6 | |
| Phynox® - CoCr20N16Mo7, DIN 2.4711, ISO 5832-7, ASTM F1058, R30003 / R30008 | |
| Stainless steels | |
| 1.4310 - Stainless steel / X10CrNi18-8 / ~ AISI 301 | |
| 1.4310.4 - Stainless steel / X10CrNi18-8 / ~ AISI 301 | |
| 1.4401 - Stainless steel / X5CrNiMo17-12-2 / ~ AISI 316 | |
| 1.4404 - Stainless steel / X2CrNiMo17-12-2 / ~ AISI 316L | |
| 1.4435 - Stainless steel / X2CrNiMo18-14-3 / ~ AISI 316L | |
| 1.4441 - stainless steel (implants) / X2CrNiMo18-15-3 / ISO 5832-1 / ASTM F139 | |
| Other specialties | |
| Ti - Titanium Grade 1 / ASTM F67 / ISO 5832-2 / 3.7025 / R50250 | |
| Ti - Titanium Grade 2 / ASTM F67 / ISO 5832-2 / R50400 / ~3.7035 / T40 |
품질 관리
당사는 모든 제품의 품질관리를 위하여 엄격한 품질계획을 수립하고, 목표달성을 위해 정기적 검증 및 품질 불만사항을 검토하여 추가계획을 수립합니다
